Fixed vs Opening Rooflights – what are the pros and cons?
Choosing the right rooflight design for your project is important both from an aesthetical and practical viewpoint. Of course you’ll want your rooflight to look good and perform well, but one of the other major considerations which you’ll want to factor in, is whether your rooflight has the ability to open or not.
As the UK’s only bespoke rooflight manufacturer that offers a specific design for both fixed and opening rooflights we often get asked what about the pros and cons of each.
As an obvious starting point the only real downsides to a fixed design is lack of ventilation and/or the ability to access the roof. If there is a requirement for either of these things then an opening rooflight design is a must.
However, if you can live without the need for an opening design then fixed rooflights do offer a number of benefits. Perhaps the greatest of which being that they are significantly cheaper and can cost up to 30% less than an opening rooflight.
Fixed rooflights are also more thermally efficient and tend to offer a slimmer profile and greater viewable area than an opening alternative. Another important factor is that they weigh less, which means that they can be less expensive to transport and install. Read our blog on large format rooflights to find out more about how large and heavy rooflights often need specialist crane equipment in the installation process.
Where an opening rooflight is the preferred option there are also a number of considerations to bear in mind.
Manual or electric opening rooflight?
When it comes to opening rooflights, size is everything and the bigger the opening section the heavier it is, meaning the more power is required to lift it.
Smaller opening rooflights tend to operate manually but if you opt for a large rooflight most will be operated with electric actuation. We will offer a manual option up to around 1000mm (w) x 1500mm (h) or 1350mm (w) x 1100mm (h). Anything beyond these dimensions and the winder will start to have problems with the casement weight and the ability to tightly close the corners. Bearing in mind that Stella use extremely high quality and robust British made solid brass winders, where many other manufacturers often use cheaper, and significantly lower quality imports, it’s well worth checking what your rooflight manufacturer recommends as a maximum size for a manually operated rooflight.
For larger sizes we offer a range of electric actuator options which are supported by wind, rain and temperature sensor options. Our bespoke Stella conservation rooflight operates with a small cill mounted actuator to push the casement open. As the casement size and weight increases, so does the number of drives required to lift it, so there is a trade off in that bigger single casements offer more light but they are more expensive to operate.
The chain actuators are typically located at the cill of the rooflight and are visible from the inside. The standard colour for the actuator box is RAL9006 White Aluminium although we can colour code to any RAL colour of your choice. The drives that we use are strong, durable and neat but occasionally we are asked if there is a way of opening our rooflights without seeing the drives. In this situation we can offer our concealed actuator design where the drives are fitted with the liner. This does result in a slight reduction in clear viewable area but leaves the cill area clear of any interruption. For details about our rooflight actuators or our concealed actuator design, please speak to our team.
The drives have various chain lengths and would normally be expected to achieve an opening distance of around 350mm. These can be operated by wall switch or remote options.
It is also worth noting that we will usually include a wind sensor with any opening casement which is larger than 2000mm x 1000mm. This sensor automatically closes the casement or prevents it from opening when the wind speed reaches a certain limit. If you are designing large area of opening roof glazing it is important that you consider the impact wind has on open rooflights along with the potential damage that can occur if wind sensors are not used.
Can I have a combination of fixed and opening rooflights?
In short, yes – you absolutely can and we often advise our customers to have a mix of both.
With most modern rooflight designs you tend to see a run of much smaller rooflights linked side by side with multiple casements opening to achieve the required ventilation. As all Stella rooflights are bespoke, we have the ability to make much larger opening casements, which provides both increased light and ventilation when compared to linking.
We can offer customers the best of both worlds and they can choose a combination of fixed and opening rooflights, with a variety of manual mechanisms, gas struts or electric actuators to suit their needs.
If cost is a significant factor in your project then there are a couple of important questions to consider:
Does your rooflight needs to open for access or ventilation?
A fixed rooflight is a lot more cost effective than an opening version. If you have alternative sources of ventilation in the room then it might not be necessary to have your rooflight opening.
If it does need to open, is it small enough to operate manually?
A rooflight which can open with our manual screwjack winder will be considerably cheaper than an electrically actuated version. Anything up to 1000mm wide x 1200mm high can operate with a manual winder so if your rooflight is only slightly bigger than those dimensions, you could save a lot of money by reducing the size slightly.
For options and advice about fixed or opening rooflights on your project, get in touch with our friendly knowledgeable team on 01794 745445 or email us at firstname.lastname@example.org